Phenolic Faced Plywood - 3/4" (18 mm) x 24" x 32"

Phenolic-Faced Plywood is composed of birch plies sandwiched between a top and bottom layer of phenolic-impregnated birch plywood. Phenolic-Faced Plywood can be machined with standard woodworking tools and has great screw-holding capabilities. It is dimensionally stable. It is the only multi-ply material that has a protective surface able to withstand the wear and tear of your woodworking shop. Common uses include shop-built auxiliary tables, fences, jigs and fixtures, however, with its attractive color, this material could also be used in furniture construction where "toughness" is a requirement.
Features:

• Glued together with a waterproof phenol resin adhesive (exterior glue)
• Protective surface
• Attractive Brown color (color may vary)

• Thickness: 3/4" (18 mm)
• Width: 24"
• Length: 32"
• 3/4" Phenolic-Faced Plywood has 13 plies
• Sheets are 24" x 32", +/- 1/4"

• (1) Phenolic-Faced Plywood 3/4" (18 mm) x 24" x 32"

• Wood is a product of nature, and as such, no two pieces are alike to start with, the same wood growing in different locales can vary greatly even though it is the exact same species.
• Due to the nature of wood movement, shrinkage and expansion are possible. Please measure each piece carefully before starting any project.
• Cut to size from quality, kiln-dried stock.
• The grain runs with the longest dimension.
• Thin Stock is dimensioned to within +/- 1/8" of size listed.
• Carving and Turning Blocks are dimensioned to within +/- 1/4" of size listed.
• Plywood sizes are nominal, the dimensions are +/- 1/8" of size listed.
• Larger blocks are dimensioned to within +/- 1/4" of size listed.
• Smaller blocks are dimensioned to within +/- 1/8" of size listed.
• Spindle stock (1-1/2" T x 2" W) is dimensioned to within +/-1/8" of size listed.